Z Purlins

WHAT ARE Z PURLINS?

Z purlins or zed purlins are horizontal beams that are designed to form the roof and wall joists of a building shell structure (also view our C section purlins page). They sit between the roofing sheets and the building, acting as a support for the sheet to ensure it is firmly attached and safely in place.

Our Z purlins are most commonly used in agricultural and industrial buildings due to their extremely versatile and lightweight properties which make them easily adapted for use in a variety of different sized buildings.

SIZES

At Rhino Steel Cladding we stock Z purlins in a wide range of thickness which can be manufactured to your precise requirements up to 8m (26.25 feet) in length. We can also supply them un-drilled or with pre-drilled holes at 18mm diameter (small hole sizes available on request).

Our full range of thickness available for Z purlins are:

  • 1.2mm
  • 1.3mm
  • 1.4mm
  • 1.5mm
  • 1.6mm
  • 1.8mm
  • 2.0mm
  • 2.5mm

With a choice of the following heights:

MillimetresInches
121mm4.76″
140mm5.51″
175mm6.89″
177mm6.97″
200mm7.87″
235mm9.25″
265mm10.43″

ACCESSORIES

We also supply the full range of purlin accessories including:

  • C section purlins
  • Eaves beams
  • Side rails
  • Anti-sag bars
  • Anti-sag rods
  • Cleader angles
  • Sleeves
  • Cleates
Purlin Sleeve and Cleats Diagram

The diagram below shows Z purlins (with cleats) used to form the complete shell of a building:

Z SECTION PROPERTIES

DO YOU NEED PURLINS FOR YOUR BUILDING PROJECT?

Call our friendly sales team on 01675 462692 for more information or to place your over the phone or purchase your purlins and accessories on our online shop.

ORDER YOUR PURLINS