Purlins are galvanised steel beams that allow you to safely attach roof and wall cladding sheets to any building. The combination of our Z purlins and C section purlins provides a strong and sturdy complete structural solution ready for roofing and side cladding.
C SECTION PURLINS
C Section Purlins are designed to form the walls and floor joists of a building shell structure and are ideal for support beams for mezzanine flooring.
They can also be used for door framing, roof trimming, window trimming, parapet rails and side rails.
Z Purlins are designed to form the roof and wall joists of a building shell structure.
They sit between the steel sheets and the building, acting as a support for the sheets to ensure it is firmly attached and safely in place.
Our zed purlins and cee section purlins are available in a range of thicknesses and manufactured to customers’ precise requirements up to 8m (26.25 feet) in length. We can supply them un-drilled or with pre-drilled holes at 18mm diameter (small hole sizes available on request).
Our full range of thicknesses available for both Z and C purlins are:
With a choice of the following heights:
|Z Purlin Heights (mm)||Z Purlin Heights (inch)||C Purlin Heights (mm)||C Purlin Heights (inch)|
See examples of customer installations using steel purlins.
We also supply the full range of Z and C purlin accessories including:
- Eaves beams
- Side rails
- Anti-sag bars
- Anti-sag rods
- Cleader angles
DO YOU NEED PURLINS FOR YOUR BUILDING PROJECT?
ORDER YOUR PURLINS & BEAMS
Galvanised Steel Z purlins – Pack of 5.6m, 7m, 8m & 8.1m lengths, 265mm deep£250.00
Galvanised Steel Z purlins – Pack of 7m, 7.5m & 7.65m lengths, 235mm deep£220.00
Galvanised Steel Z purlins – Pack of 9 x 6.09m lengths, 200mm deep/1.4mm gauge£326.00
Galvanised Steel Z Purlins – Pack of 13 x 6.09m Lengths, 265mm deep/2.5mm gauge£470.00
Steel C Section Purlins (Manufactured to size)
Steel Z Purlins (Manufactured to size)
Purlin Cleats (Bolt On)
Steel Eaves Beams (Manufactured to size)
Sleeves£5.00 – £14.50