Roof Flashing

Flashings are used to protect the edges of roofs and walls. Our barge boards, ridge cappings, eaves flashings, abutment flashings, corners, headers, door flashings and drip cills are all made of galvanised steel and can be folded to exact specifications.

BARGE BOARD FLASHINGS

90 Degrees Roof Barge Board

Barge board flashings can be used on the gable ends of an apex roof, to flash around a single-sloping pitched roof and on the corners of buildings.

They provide closure between sheets and walls, protection against high winds and ensure a professional neat finish to any building.

RIDGE CAPPING

135 Degress Roof Ridge Capping

Ridge capping is used on the ridge of an apex roof.

It provides the closure between sheets to prevent water leakage and protection against high winds.

SPECIFICATIONS

We stock large quantities of barge board flashing and ridge capping in all standard colours.

Our flashings from stock are manufactured in 3m lengths, 150mm x 150mm with a 90° bend on the barge boards and 135° bend on the ridge cappings.

We can manufacture any type of flashing to any requirement.

As you can see we have a great selection of flashings suited to a wide range of roofing styles. If you would like any more information on our products or if you need advice on which would be best suited to your exact needs, get in touch with our knowledgeable team now on 01675 462 692.

ORDER YOUR FLASHINGS